How Should Crystals Be Cleaned Using Himalayan Salt? A Simple Guide

close up photo of himalayan salt

Crystals have to be polished before they can provide a clear reflection.

Cleaning crystals and stones are done with the intention of bringing them back to their unaltered form.

Your crystals’ energy may be restored to the vibrational frequency they had when they were first formed on Earth if you cleanse them with the purpose of doing so.

You may cleanse your crystals in a number of different methods, and there is no one method that is superior to the others. Nonetheless, the most important aspect of crystal cleansing is doing it with a focused goal.

The more familiar you get with your crystals, the greater your intuitive understanding will be of which techniques are most effective for you.

In this post, we will look at how to wash crystals using Himalayan salt, which crystals may go into Himalayan salt, and which crystals might be harmed by this technique of cleansing crystals.

Is It Possible For Himalayan Salt To Cleanse Crystals?

Due to the fact that salt has a natural cleansing effect, many people choose to include it in their bath water or make use of it during religious rites to form protective bands.

Additionally, this is an effective method for cleaning your crystals.

The treatment with Himalayan salt is a straightforward spiritual practice that has been shown to be beneficial in warding off harmful, unseen energy.

It is used in the process of transporting negative energy. Imagine it as being similar to a sponge.

When you submerge a sponge in water, the sponge will consume all of the water in its immediate environment until it is completely saturated.

When it comes to energy, Himalayan salt performs the same function.

As soon as the salt makes contact with our crystals, it is able to take in all of the bad energy that is contained inside our stones.

After the stone has been purified, you will be able to reap all of the advantages and metaphysical healing capabilities that the stone has to offer without the presence of any negativity that may have been lingering around you and your crystals.

What Is The Best Way To Clean Crystals Using Himalayan Salt?

In the next section, we are going to discuss how to purify crystals using Himalayan salt.

It is important to keep in mind that you must cleanse your crystals at the right period no matter which of the three procedures you choose to attempt.

See also  How to Read Tarot Cards (for beginners)

The New Moon

During the time of the New Moon and for a few days following, if you so wish, you may place crystals near a window or even outdoors.

The energy of the New Moon is very cleansing, and it plays an important role in the process of energy manifestation.

It is a wonderful time to contemplate your hopes and dreams for the following waxing moon cycle, so give some thought to them now.

Full Moon

If you wish to purge the negative energy from your crystals during a full moon, set them near a window or outdoors during the full moon and leave them there for a few days thereafter.

The energy of the Full Moon is purifying and invigorating, and it makes it possible to let go of energies that have been dormant.

The First Approach

Traditional in its use as a cleaning agent, Himalayan salt is an excellent choice for purifying crystals.

Mix together one tablespoon of the pink Himalayan salt and one cup of water in a container made of glass.

It is important that you keep in mind that you should not store Himalayan salt in a container made of metal or plastic.

It must be put inside a container made of glass. You should let the crystals soak in the water for the whole night.

Another option is to make use of dried Himalayan salt. Just make sure you apply enough salt to completely cover your crystals.

The Second Approach

One other method for cleansing crystals with Himalayan salt is to position the crystals in close proximity to a Himalayan salt lamp.

When you turn on the lamp, you need to make sure that the bulb is the right size so that it can heat the salt.

Turn on the light and position the crystals in the vicinity for a minimum of twelve hours.

After the twelve hours have passed, you are free to remove the crystals from the light and switch it off.

You may get the most out of this procedure by placing the crystals you want to cleanse on top of a selenite crystal. This will guarantee that your crystals are properly cleansed.

The Third Approach

Salt therapy, also known as halotherapy, is a trendy health fad that involves meditating in a chamber that contains Himalayan sea salt. Salt therapy is also often referred to as “salt cave therapy.”

Put your crystals in the room where you want to meditate and see if it makes a difference.

See also  The Healing Properties of a Desert Rose

Before you begin your trip via meditation, check to see if your intentions are good.

You want to have a clear brain, an open heart, and energy flowing through you so that you may cleanse yourself in addition to the stones that you are working with.

When you are ready, position the crystals so that they are next to the Himalayan salt.

You have the option of either using a salt lamp or taking a salt bath.

Wrap your dominant hand around the bowl of salt or around the lamp so that the salt may restrict the good energies you are utilizing to clear your crystals. This can be done either by wrapping your hand around the bowl of salt or by wrapping your hand around the lamp.

This approach does not have a time constraint of any kind.

Once you reach the point when you believe that your stones have been thoroughly cleaned, you may express gratitude to the Himalayan salt for assisting you during the process of meditation and purification.

What Kinds of Crystals Are Suitable for Himalayan Salt?

Himalayan salt has the ability to purify crystals, even those that are on the more brittle side. Crystal in the form of:

  • Onyx nebulous
  • Rose Quartz
  • Crystalline Quartz
  • Amethyst
  • Citrine
  • Red Aventurine
  • Smoky Quartz Crystal
  • Jasper
  • Agate
  • Carnelian
  • Chalcedony

Which Crystals Should Never Be Placed Within Himalayan Salt?

Not all stones can be put in pink Himalayan salt. Salt is a corrosive material that has the potential to damage some kinds of gemstones.

You should never use salt on semiprecious gemstones because it is very abrasive and may cause damage to the stone. You should also avoid using salt on the most vulnerable stones since it can cause them to become transparent, pale, and lifeless.

  • Angelite
  • Azurite
  • Turquoise
  • Malachite
  • Topaz
  • Moonstone
  • Opal
  • Selenite

All of the crystals that were just described are very susceptible to being damaged.

After soaking your crystals in water containing Himalayan salt, be sure to thoroughly rinse them in water that is both cold and flowing in order to remove any traces of salt.

It is important to ensure that any remaining salt water is removed and that the container is cleaned thoroughly before it is used again.

Crystals of a delicate nature, such as azurite, may be submerged in a bath of Himalayan salt.

In this step of the process, you will wash your crystals by rubbing them with dry Himalayan salt.

See also  Top 12 Crystals for Relieving Distress (Best Ones to Use!)

There is a chance that the interaction of salt and water may damage your stone. However, you may make your ring seem new again by soaking it in some pink salt.

When everything is said and done, the general rule of thumb is that if a crystal’s name ends in ITE, it is best to err on the side of caution and avoid incorporating it into any form of salt.

Conclusions Regarding the Methods for Purifying Crystals Using Himalayan Salt

Crystals are known for their ability to aid in the healing of the mind, body, and spirit. Your crystals are taking on a significant challenge there.

They are there to free you and your environment of the negativity that is there, and your crystals need to be cleaned on a regular basis so that they may continue to be of assistance to you in the most effective manner possible.

If it is at all feasible, you should clean them on a regular basis; once a month is a good starting point.

As a consequence of this, they will constantly be willing to assist you whenever you need it.

Through reading this post, we have gained knowledge on how to purify crystals using Himalayan salt. If you are new to the field of cleanliness, there is a way that is straightforward and uncomplicated for you to carry out.

When you utilize your crystals after taking the time to cleanse and recharge them, you will notice a significant difference in their effectiveness.

It will increase their capacity for healing, and it will make it possible for you to fully appreciate their powerful energy.

Studying your gems is always going to be a good idea.

If you do this, you will be able to determine the most effective approach for purifying and charging your crystals.

If you want to learn more about cleaning and charging crystals, the articles mentioned above will share with you other techniques than using Himalayan salt to clean your crystals if you are interested in expanding your knowledge in these areas.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *


Register now to get updates on new esoteric articles posted

Please enter your email and Hit the Subscribe button!

You have successfully subscribed to the newsletter

There was an error while trying to send your request. Please try again.

The-Enlightenment-Journey will use the information you provide on this form to be in touch with you and to provide updates and marketing.
%d bloggers like this: